A softener's resin bed, or the media in other filter tanks, loses capacity over time. When output water starts to look harder, or scale and staining come back sooner than they used to, the question is whether you can diagnose it yourself and how much of the repair you should hand over. The honest split is that the checks are yours and the physical media work is usually a professional job.
Checks you can do yourself first
- Confirm the regeneration settings match your water test and the install record, including the hardness setting and the timing or metering method.
- Look at the brine tank. Check the salt level and whether the salt has formed a hard crust or a bridge that keeps water from reaching the salt below it.
- Test the softened water at a tap after a regeneration cycle, using a hardness strip or test kit, and write the reading down with the date you took it.
- Check the service log for the last time the media or valve was serviced and what was found.
- Note the symptoms in plain terms: hardness returning sooner, scale on fixtures, iron staining, or a change in taste or smell.
What to hand to a professional
- Opening the tank, and removing or replacing the resin or filter media.
- Any work on the valve head or distributor, or any job that means disconnecting pressurized plumbing.
- Cleaning or sanitizing the tank interior.
- Electrical work on the controller or pump.
- Any step where you cannot cleanly isolate the system from the water supply and the drain.
Questions to ask before the work starts
Ask what media they plan to use and why it suits your water numbers. Ask whether they will test the water after the work and write the readings down for you. Ask them to set the regeneration schedule in writing using your numbers, not a default. Ask what the work covers and for how long, and what happens to the spent material when the old media comes out.
Keep the record that makes the next call easier
Whatever you find yourself, write it down in the service log: the settings you saw, the salt level, the test reading, and the symptoms. A written trail lets a professional start from facts instead of guesses, and it shows you whether the problem is a setting you can correct or a bed that has reached the end of its useful life.